Marcar is the distributor and stockholder of Faro combined bearings. Our Italian principals have been manufacturing bearings for over 30 years
Faro bearings have been designed to meet the technical requirements of fork lift mast manufacturers but are also suitable for any other equipment where a linear motion is required.
FARO combined bearings provide the best resolution of the external load into its components: the radial load acts on the main radial bearing and the axial load acts on the side guide roller.
These properties result in the best distribution of the pressures as well significant minimisation of the pressure between bearing and profile as well as improved life expectancy.
The assembling of Faro combined bearings is very easy. The radial bearing and side guide roller are fitted in the bolt which is ready to be welded to the beam.
We offer the following types of combined bearings:
-For high speed
-Adjustable of large dimensions
-Adjustable with eccentric pin
-Adjustable with eccentric pin – jumbo
-Radial with pin
Our bearings and plates are designed to match our special steel sections on offer as listed in our brochures.
\ We also offer track rollers NUTR type.
Our warehouse is located in the West Midlands and we offer next day delivery whenever possible.
Marcar Steel & Engineering
t: 0208 8940 8201